Biosafety Cabinets are specialized workstations widely used in clinical,pharmaceutical, life science and industrial laboratories where experimentsneed highly contaminant free environment. Also known as biological safetycabinets and biohazard safety cabinets, these are made in three differentclass types such as Class 1, Class 2 and Class 3; in which Class 2 is widelysed in microbiology laboratories because it provides protection to bothproduct as well as personal. It is biosafety level factor which decides whichBSC should be used in laboratory. These cabinets are considered saferthan other clean benches because such BSCs effectively eliminate risksto operator / staff, samples and the environment from pathogenic biologicalagents (PBA) and microorganisms responsible for spreading airborneinfection.
We offer three types of class 2 biosafety cabinets are made. It is the type ofwork which decides which class 2 BSC should be used in laboratory. Belowis short description about all types we offer:
Type A2: recirculate approximately 70% air and 30% exhaust
Type B1: recirculate approximately 30% air and 70% exhaust
Type B2: Does not recirculate but exhaust 100% air
Our cabinets are ergonomically designed to provide long service life. Only thickmetal sheets and pipes are used in construction so that you may get the finest andsafest Biosafety Cabinet in the market today. There are three different MOC used.
Complete Stainless Steel 304 / 316
Inner Stainless Steel, Outer Mild Steel
Stainless Steel bench, rest mild Steel
Air Circulation of Class II A2
In order to minimize spread of airborne bacterial and viral organisms, the use of filteris crucial; therefore, we use 99.95% efficiency HEPA filters for particle size 0.3microns in our biological class 2 type A2 safety cabinets. These air filters are of ISO5 / Class 100 quality. Inflow velocity remains approx. 105 fpm (0.5 m/sec) whiledown flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and30% exhaust.
Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UVlamps are fitted inside working zone in such a way that the operator cannot see themdirectly. Microprocessor controlled mechanism allows UV on only when door isclosed. Auto sensors facilitate to run blower after opening of door only. User can setwarm time as per convenience which in turn will tun on the FL light only after settime and door open controlled by microprocessor. Electrical sockets are fitted to runany instrument under the working area; in addition, service fixtures for air, gas,
Plot No. 2/280, 1st Floor, Subhash Nagar, Near Cambridge School New Delhi Delhi India